Finishing
creates a larger margin space by shifting the printable area to the right, or down
as much as one inch (25.4 mm).
Creating a Gutter
You can increase the margins on the left side and at the top of the printed sheet.
1
In the
Finishing
tab, click
Gutter
.
2
In the
Gutter width
options, type or select a value between 0.20 to 1.00 inches
(5.0 to 25.4 mm).
Long edge (left)
This selection modifies the outside margin on the left-side of the page.
Short edge (top)
This selection modifies the outside margin on the top-edge of the page.
Note:
Availability of
Gutter
settings vary depending on
Finishing edge
settings, and
Orientation
and
Duplex mode
settings in the
Basic
tab.
3
If text extends too close to the edge of the page, select
Reduce image to fit
.
The text appears slightly reduced and away from the edge of the page. If text
does not extend beyond the page when the gutter increases, clear
Reduce
image to fit
.
4
Click
OK
to return to the
dialog box.
5
Click
OK
to start printing.
KX DRIVER
6-5
Summary of Contents for TASKalfa 255
Page 1: ...User Guide TASKalfa 255 TASKalfa 305 Printer Driver ...
Page 90: ......
Page 91: ......
Page 92: ...Rev 12 25 2010 9 ...