Kyocera TASKalfa 1801, Operation Manual

Page: 55 / 152

3-16
Sending Faxes > Original Size
Original Size
Specify the original size to be scanned.
FAX Resolution
Select fineness of images when sending FAX. The larger the number, the better the image resolution. However, better
resolution also means larger file sizes and longer send times.
File Name Entry
Adds a file name. Additional information such as job number and date can also be set. You can check a job history or job
status using the file name, date, or job number specified here.
Enter the file name (up to 32 characters), and press the [ OK ] key.
To specify a date or job number, select [Additional Info.] and press the [ OK ] key.
Item Description
Auto Have the size of original detected
automatically.
A3, A4-R, A4, A5-R, A5, A6-R, B4, B5-R, B5, B6-R, B6, Folio, 216 × 340 mm, Ledger,
Letter-R, Letter, Legal, Statement-R, Statement, 11 × 15", Oficio II, 8K, 16K-R, 16K,
Hagaki, Oufukuhagaki, Custom
*1
*1 For instructions on how to specify the custom original size, refer to the machine’s Operation Guide .
Select from standard sizes.
NOTE
Be sure to always specify the original size when using custom size originals.
Item Description
200x100dpi Norm.(Normal) when sending originals with standard size
characters Typical character size: 10.5 point
(example:
Resolution Resolution
)
200x200dpi Fine(Fine) when sending originals
with relatively small characters and thin lines Typical character size: 8 point
(example:
Resolution Resolution
)
200x400dpi S.Fin(Super Fine) when sending originals with minute characters and
lines Typical character size: 6 point
(example:
Resolution Resolution
)
NOTE
The default setting is [200x100dpi Norm.]. The higher the resolution, the clearer the image, but the fax transmission
time is longer.
Character Entry Method (page 11-2)