Kyocera payLo, User Manual

Page: 47 / 104

Contacts 40
ICE Contacts
You can register up to five ICE contacts.
To add an ICE contact:
1. From standby mode, press and hold
.
Tip: You can also access the ICE menus by pressing CONTACTS (right softkey) > ICE in standby mode.
2. Highlight
Add to ICE Contacts and press or ASSIGN (left softkey).
3. Highlight the entry you want to register as an ICE contact and press
.
l
If the entry has more than one number, press the navigation key right or left to display the
number you want to assign and then press .
To remove an ICE contact:
1. From standby mode, press and hold
.
2. Highlight an ICE contact and press REMOVE (right softkey) > YES (left softkey).
Call the ICE Contact
When you call an ICE contact, the registered emergency message and the GPS information will be sent
to the contact. See
Emergency Message .
1. From standby mode, press and hold
.
Tip: When the phone is locked, using the Lock Phone feature, you can also press ICE (right softkey).
2. Highlight an ICE contact and press
, or CALL (left softkey).
3. Read the message and press , or OK (left softkey).
Note: When Location settings is turned off, it will be automatically turned on.
Emergency Message
Register a message to accompany an ICE call. The GPS information will be attached to the message.
To enter or edit the emergency message:
1. From standby mode, press and hold
.