User Guide
41
Network
Enable Data Mode
Your phone may be able to receive certain data,
depending on the system sending the information.
You cannot receive voice calls while the phone is
in data mode. To receive data, you must connect
the phone to a laptop or PC and switch the phone
from voice mode to data mode.
Note:
To purchase a cable, visit
www.kyocera-wireless.com/store
.
To enable data mode:
From
Data Calls
, select one of the following:
•
Voice Only
turns data mode off.
•
Data, next call
sets the phone to data mode
for the next incoming call or the next ten
minutes.
•
Data, until off
sets the phone to data mode
until the phone is off.
Enable Privacy Alert
From
Privacy Alert
, select
Enabled
to set your
phone to alert you when enhanced digital CDMA
privacy is lost or regained.
Enable Voice Privacy
From
Voice Privacy
, select
Enhanced
to use
enhanced digital CDMA privacy.
Enable Roaming Service Alert
Use this setting if you want the phone to alert you
when you roam outside of your home service
area.
From
Roam/Svc Alert
, select one of the
following:
•
Disabled
turns roaming service alert off.
•
When no svc
alerts you with three tones
decreasing in pitch when service is lost and
three tones increasing in pitch when service is
acquired again.
•
On roam change
alerts you with two
decreasing tones when roaming service is
acquired and three increasing tones when
home area service is acquired again.
•
On any change
alerts you with three
increasing tones if there is a change in
roaming service or three decreasing tones if
the phone loses service.
Set Roaming Restrictions
You can restrict your phone from making a call
when roaming.
From
Roam Option
, select
Automatic
(to allow
roaming) or
No roaming
(to disallow roaming).
82-L2609-2EN.book Page 41 Monday, July 13, 2009 2:48 PM
