Kyocera FS-1025MFP, Operation Manual

Page: 118 / 202

7-6
FAX Operations
TX Start Speed
Set the TX Start Speed. When communication conditions are bad, the fax may not be transmitted correctly. In that case,
set a lower TX Start Speed.
1
Press [Menu] .
2
Press [ ▲ ] or [ ▼ ] to select
System Menu
.
3
Press [OK] .
4
Press [ ▲ ] or [ ▼ ] to select
FAX
.
5
Press [OK] .
6
Press [ ▲ ] or [ ▼ ] to select
Transmission
.
7
Press [OK] .
8
Press [ ▲ ] or [ ▼ ] to select
TX Start Speed
.
9
Press [OK] .
10
Press [ ▲ ] or [ ▼ ] to select
9600bps
,
14400bps
or
33600bps
.
11
Press [OK] .
PBX Setting (Europe only)
When using this machine in environment in which PBX for connection to multiple phones for business use is installed,
perform the following PBX setting.
Registering Destinations in the Address Book
Add a new destination to the Address Book. To edit the Address Book, use KYOCERA Client Tool. For details, refer to
Address Book on page 2-39 .
Note Normally this should be used with the default setting.
TX Start Speed b
9600bps
Note Before connecting this machine to PBX, it is recommended to contact the company that installed the PBX
system to request connection of this machine. Note that correct operation cannot be guaranteed in environment in
which this machine is connected to PBX because the functions of this machine may be restricted.
Item Setting value Description
Exchange Select. PSTN Use when connecting this machine to a public switched telephone network
(default).
PBX Use when connecting this machine to PBX.
Dial No. to PSTN 0-9
00-99
Set a number to access an outside line. For the number, contact the PBX
administrator.
Note For more information about configuring settings, refer to Adjustment and Maintenance on page 7-27 .