Basic Operations
35
Basic
O
p
er
atio
n
s
How to disconnect the USB cable
To disconnect the USB cable or turning off the power switch of the camera, follow the
instructions below.
For Windows Me:
1
Double-click the “Unplug or Eject Hardware” icon on the task bar in the lower
right corner of the desktop.
2
Select [USB Disk], then click [Stop].
3
Select [Kyocera E:], then click [OK].
●
If [Kyocera E:] won't appear, a different unit was selected. Click [Cancel] in this step, and
return to step 2. Then select another [USB Disk].
* The indication of [Kyocera E:] may vary with the PC you are using.
4
Click [OK] when a message appears.
5
Disconnect the USB cable and turn off the power switch of the camera.
For Windows 2000:
1
Double-click the “Unplug or Eject Hardware” icon on the task bar in the lower
right corner of the desktop.
2
Select [USB Mass Storage Device], then click [Stop].
3
Select [Kyocera Finecam L4 USB device]*, then click [OK].
●
If [Kyocera Finecam L4 USB device] won't appear, a different unit was selected. Click
[Cancel] in this step, and return to step 2. Then select another [USB Mass Storage
Device].
* In some PCs, select [Kyocera Finecam L3 USB device]*.
4
When the message "[USB Mass Storage Device] can be removed safely."
appears, click [OK].
5
Disconnect the USB cable and turn off the power switch of the camera.
For Windows 98/98SE:
Turn off the power, then disconnect the USB cable.
For Windows XP users:
1
Double-click [Safely Remove Hardware] icon on the [Task Bar] at the lower right
of the desktop.
2
Select [USB Mass Storage Device], then click [Stop].
3
Select [Kyocera Finecam L4 USB device]*, then click [OK].
●
If [Kyocera Finecam L4 USB device] won't appear, a different unit was selected. Click
[Cancel] in this step, and return to step 2. Then select another [USB Mass Storage
Device].
* In some PCs, select [Kyocera Finecam L3 USB device]*.
4
The message "The 'USB Mass Storage Device' device can now be safely
removed from the system." and the pop-up menu appear on [Safe To Remove
Hardware] icon on the [Task Bar] at the lower right of the desktop, then click
[Close] of the [Safely Remove Hardware] dialog.
5
Disconnect the USB cable and turn off the power switch of the camera.
00_8CQ.book Page 35 Wednesday, May 14, 2003 8:10 PM
