Preparation of Camera
16
Pre
par
atio
n of
Camera
2
Turning the Power ON
3
Setting the Date and Time
If the camera has been left for a long time without a battery pack, the date and time will be
reset. When you replace the battery pack with a new one, make sure that the date and time
are correct.
Press the POWER button.
●
The picture you take with this camera can be set
as the startup screen. (page 89)
■
Battery indicator and replacing time
1
Set the mode select dial to
“SET UP”.
The setup menu is displayed.
2 Set the date and time
.
1
Press Down on the directional keypad to
select [DATE], then press Right on the
directional keypad.
2
Use the directional keypad to set the
date and time.
●
Press Left or Right on the directional
keypad to move the cursor to Year
Month
Day
Hour
Minute
Display format*.
●
Press Up or Down on the directional
keypad to change each value and the
display format.
For Display format of date, see
page 17.
Fully
charged
Half
consumed
Remaining
power is low.
Replace the
battery pack
soon.
The camera cannot
be operated.
Replace the battery
pack.
DISP.
U
P
T
E
S
SET UP(1/3)
DISP.
MENU
DATE/TIME ADJUSTMENT
Y.M.D
CANCEL
OK
00_8CQ.book Page 16 Wednesday, May 14, 2003 8:10 PM
