Kyocera ECOSYS M3540dn Operation Manual Download Page 191

Page: 191 / 214

9-5

Troubleshooting > Messages

Polling box limit exceeded.
Job is canceled.

Is [OK] displayed on the screen?

The specified box is full, and no further
storage is available; Job is canceled.
Press the [

] key. Try to perform the job

again after printing or deleting data from
the box.

5-22

Scanner memory is full. Job is
canceled.

―

Scanning cannot be performed any more
due to insufficient memory. The job is
canceled. Press the [

] key.

―

Scheduled sending jobs
exceeded.

―

The number of jobs has exceeded the
limit set for delayed transmission. Press
the [

] key. The job is canceled.

Wait until the delayed transmission is
executed, or cancel the delayed
transmission and then perform the job
again.

3-22

The phone receiver is
off the hook. Hang Up.

―

Put down the receiver.

―

This user account is locked
out.
Contact administrator
Job is canceled.

―

Contact administrator.
The job is canceled. Press the [

] key.

―

Message

Checkpoint

Corrective Action

Reference

Page

Summary of Contents for ECOSYS M3540dn























































































































































































































Search results

Summary of Contents for ECOSYS M3540dn

Reviews:

Brands by name

Popular brands

Kyocera ECOSYS M3540dn, Operation Manual

Search results

Summary of Contents for ECOSYS M3540dn

Reviews:

Brands by name

Popular brands