Kyocera Ecosys FS-1320D Operation Manual Download

Page: 97 / 112

Option

6-7

Network Interface Card (IB-23)

The network interface card supports TCP/IP, IPX/SPX, NetBEUI and
AppleTalk protocols, so that the printer can be used on network
environments including Windows, Macintosh, UNIX, NetWare, etc.

The network interface card must be installed in the option interface slot
that is located at the back of the printer.

Turn off the printer and disconnect the power cord and printer cable.

Open the rear cover.

Remove the optional interface slot cover.

Insert the Network Interface Card and secure it with the screws
removed in step 3.

Close the rear cover, and connect the printer cable.

Connect the power cord, and turn on the printer.

Configure the network address from Quick Setup. For more
information, refer to

Operation Guide

of the network card.

CAUTION

Before inserting a network interface card in the

printer, make sure that the printer is switched off.

Summary of Contents for Ecosys FS-1320D

















































































































Search results

Summary of Contents for Ecosys FS-1320D

Reviews:

Related manuals for Ecosys FS-1320D

Brands by name

Popular brands

Kyocera Ecosys FS-1320D, Operation Manual

Search results

Summary of Contents for Ecosys FS-1320D

Reviews:

Related manuals for Ecosys FS-1320D

Brands by name

Popular brands