Kyocera Ecosys FS-1320D Page 71 Operation Manual Download

Page: 71 / 112

Maintenance

4-9

Prolonged Non-Use and Moving of the Printer

Prolonged Non-use

If you ever leave the printer unused for a long period of time, remove the
power cord from the wall outlet.

We recommend you consult with your dealer about the additional actions
you should take to avoid possible damage that may occur when the
printer is used next time.

Moving the Printer

When you move the printer:

•

Move it gently.

•

Keep it as level as possible to avoid spilling toner inside the printer.

•

Be sure to consult a service technician before attempting
longdistance transportation of the printer.

WARNING

If you ship the printer, remove and pack the

developer unit and drum unit in a plastic bag and ship them
separately from the printer.

Summary of Contents for Ecosys FS-1320D

















































































































Search results

Summary of Contents for Ecosys FS-1320D

Reviews:

Related manuals for Ecosys FS-1320D

Brands by name

Popular brands

Kyocera Ecosys FS-1320D, Operation Manual

Search results

Summary of Contents for Ecosys FS-1320D

Reviews:

Related manuals for Ecosys FS-1320D

Brands by name

Popular brands