manualshive.com logo in svg

Kyocera Ecosys FS-1320D, Operation Manual, Page: 82 / 112

Share
Download
Kyocera Ecosys FS-1320D Operation Manual Download Page 82

5-10

Troubleshooting

Error Indication

If the indicators light or flash repeatedly in manners not described 
above for normal or maintenance indication, a service error has 
probably occurred. Turn the printer off by the power switch, wait 5 
seconds and then turn the printer on again. This may clear the error. 
Even if the error is not cleared, contact your service technician.

Specified file not found.

Press 

[GO]

 to continue processing. 

Press 

[Cancel]

 to cancel processing.

The current printing cannot be 
continued.

Press 

[GO]

 to continue processing. 

Press 

[Cancel]

 to cancel processing.

Unable to print due to insufficient 
memory.

Install the expansion memory in the 
printer. Press 

[GO]

 to continue 

processing. Press 

[Cancel]

 to cancel 

processing.

Unable to print as the data is too 
complicated.

Press 

[GO]

 to continue processing. 

Press 

[Cancel]

 to cancel processing.

Indicator

Meaning

Remedy

Summary of Contents for Ecosys FS-1320D

















































































































Reviews:

No comments