manualshive.com logo in svg

Kyocera DP-3600, Instruction Handbook Manual

Share
Download
Kyocera DP-3600 Instruction Handbook Manual Download Page 107

Virtual Mail Box (VMB)

2-39

Operations for Using a Barcode Reader

If an optional barcode reader (Barcord Reader DP-28/3600 Series) is connected to the printer, it is

possible to print data within a virtual output tray using the barcode in the list. Select the barcode for

"Output (1)" in the upper right using the barcode reader and then select the barcode for the virtual

output tray you want to print. If you want to delete the data in a tray, select "Delete (2)" also in the

upper right and then select the barcode for the virtual output tray you want to delete. Note that all data

in the tray will be deleted.

For detailed operating procedures for the barcode reader, please read the instructions included with

the barcode reader.

Summary of Contents for DP-3600



























































































































































































































































Reviews:

No comments

Brands by name

Popular brands

Load more brands