Kyocera DP-3600, Instruction Handbook Manual

Page: 103 / 250

Virtual Mail Box (VMB)
2-35
Outputting to a VMB
When sending data to a virtual output tray set within the RAM DISK, make this setting from the printer
driver. With this setting, data can be sent by specifying the desired virtual output tray number. It is also
possible to assign a name to a virtual output tray and send data by specifying that name. (For details on
this setting, please refer to the help documentation for the printer driver.)
When data is sent by specifying a virtual output tray, printing to paper is not performed at the time data is
sent. Sent data accumulates in the virtual output trays of the RAM DISK. For details on printing
accumulated data, please see the next item.
Print Accumulated VMB Data
This function prints VMB data accumulated in a virtual output tray.
1.
Select
RAM DISK mode
on the printer's Mode Select Menu and display
>Print VMB
data Tray . The VMB tray number will appear in the location marked by # 's below, while the
VMB tray name will appear in the location marked by
%
's.
>Print VMB data
Tray###:%%%%%%%
2.
Pressing the ENTER key will cause a ? to flash.
>Print VMB data
Tray###?%%%%%%%
3.
Each time the + or – keys are pressed, the VMB data display will change. Press the CANCEL key if
you want to halt printing. The
?
display will disappear.