Kyocera Domino S1310, User Manual

Page: 57 / 144

User Guide 57
You can also press and hold the # Space key to
toggle between Vibrate Only mode and
Normal Sounds mode.
Note: The phone rings when attached to an
external power source (such as a charger), even
if all sounds have been silenced.
Volume
From Volume , you can modify the following
settings.
Set Ringer Volume
1. From Ringer Volume , scroll right or left to
set the ringer volume.
2. Press the OK key to save.
Set Speakerphone Volume
1. From Spkrphone Volume , scroll right or
left to set the speakerphone volume.
2. Press the OK key to save.
Set Earpiece Volume
1. From Earpiece Volume , scroll right or left
to set the earpiece volume.
2. Press the OK key to save.
Set Keypad Volume
1. From Key Volume , scroll right or left to set
the keypad volume.
2. Press the OK key to save.
Set Power On/Off Sounds
From Pwr On/Off , select Enabled to have
your phone play the sound when turned on.
Keypad
From Keypad , you can modify the following
settings.
Set Key Press Sounds
From Key Sounds , select Tone , Click , or Off
to set the sounds you hear when pressing the
keypad.
Set Key Tone Length
From Key Length , select Normal or Long to
set the length of the keypad tone.
Enable DTMF Tones
From DTMF Tones , select On to send
dual-tone multi-frequency (DTMF) tones when
you press the keypad.
Accessories
Set Headset Sounds
With a headset attached to your phone, you can
play the ringer through the headset or phone
speaker.
From
Headset Sounds , select Out of phone
(ringing from the phone speaker) or Out of
headset (ringing from the headset).