Kyocera DISCOVER FS-3830N, Service Manual

Page: 45 / 176

2FP/2FY/2FR-5
1-4-9
Service items Description
Identification code
(hexadecimal)
Self-diagnostic error
code (hexadecimal)
(1)
(4)
(6) to (9)
02: (fixed)
Error type
(hexadecimal)
(2)
01: Self-diagnostic error
-
-
-
(3) 00: (not used)
00: (not used)
Upper 2-digit of self-diagnostic
error code (4-digit).
(5) Lower 2-digit of self-diagnostic
error code (4-digit).
Table 1-4-3 Code table 2
Table 1-4-4 Code table 3
Code digit and description Details of code
Code digit and description Details of code
Counter reset for the maintenance kit
Description
The "Install MK" message means that maintenance kit (MK-67/MK-68) should be replaced at
300,000 pages of printing. The interval counter must be manually reset using this service item.
Maintenance kit includes the following units:
Purpose
To reset the life counter for the developer units and drum units included in maintenance kit.
Procedure for replacing the maintenance kit
1. Remove the developer unit and drum unit (See page 1-6-2 and 1-6-10).
2. Replace the paper transfer unit (See page 1-6-4).
3. Replace the fuser unit (See page 1-6-27).
4. Replace the ozone filter B and ozone filter (See page 1-6-36).
5. Replace the MP tray feed roller and retard holder (roller) (See page 1-6-14).
Method
1. Enter the service mode [>>Maintenance].
2. Press the Enter key. [?] will be displayed.
3. Press the ENTER key twice. The counter for each component is reset immediately.
Completion
>>Maintenance
Developer unit
Drum unit
Fuser unit
Paper transfer unit
Ozone filter
Ozone filter B
MP tray feed roller
Retard roller holder (roller) DV-67
DK-67
FK-67(E)
FE-67
OZONE FILTER
OZONE FILTER B
ROLLER MP ASSY
RETARD ASSY MK 1
1
1
1
1
1
1
1 DV-67
DK-68
FK-68(E)
FE-67
OZONE FILTER
OZONE FILTER B
ROLLER MP ASSY
RETARD ASSY MK
Items
Quantity
MK-67
(For FS-1920/3820N)
MK-68
(For FS-3830N)
Identification code
(hexadecimal) (1) 02: (fixed)
Error type
(hexadecimal) (2) 1C: Toner container replacement
(3) to (9)
00: (not used)
-
See page 1-5-2.
Remarks:
Self-diagnostic error codes F0, F010, F020,
F030, F040 and F070 are not recorded.