Kyocera DISCOVER FS-3830N, Service Manual

Page: 116 / 176

2FP/2FY/2FR
1-7-6
5. Data are transferred to the RAM on the main board.
6. The system DIMM or Flash ROM is overwritten with the new firmware data.
7. Firmware download is finished. (When more than one data are down loaded, the data display can be changed by
pressing any key.
8. Turn power switch off.
9. Remove the memory card.
10. Turn power switch on.
11. Check the printer gets Ready.
Confirm that the status page shows the new engine firmware, system firmware or operator panel message data version
(See page 1-4-2). If the message display indicates download error, refer to section "Downloading errors" on page 1-7-7.
Supervisor mode
CF-CARD Reading
BootROM
erase&write
engine download
<<<<<<<<<<<
message download
<<<<<<<<<<<
DIMM erasing #??
Ready
Power switch: Off
Power switch: On
Spanish 04
04/01/18[1234] 2
B
A
B B G C
E F E F E F
D G G
20 A002
04/01/18[1234] 2
84.00S
04/01/18[1234] 2
A: u= Extracting
W= Writing
V= Verifying
B: Version
C: Machine code
D: Language
E: Year/Month/Day
F: [Checksum]
G: Means more than one data
End
DIMM writing
<<<<<<<<<<u
S
E M
7. 7. 7.
8.
11.
10.
4.
5.
6. 6. 6.
Memory
card
9.
From the previous page
Supervisor mode
Message display
: System firmware
: Engine firmware
: Operator panel message data
S
E
M
: Shows only included firmware
of boot program (".bcmp" extension file).