Kyocera DISCOVER FS-3830N, Service Manual

Page: 31 / 176

1-3-7
2FP/2FY/2FR
1. Turn on the printer's power switch. The message
display should indicate [Self test].
When the printer is first switched on after
installation, there will be a delay of approximately
8 minutes before the printer gets ready to print as
the developer needs to be filled with toner. During
this period, the message display shows [Please
wait (Adding toner)].
2. Wait until the READY indicator is also lit and the
message display indicates [Ready]. The printer is
ready to print.
3. The printer can print two different types of status
page standard and service-purpose. A service-
purpose status page contains more detailed
information about printer settings than a standard
status page.
To print standard status page
(1) Press the MENU key on the operator panel.
(2) Press the
U
or
V
key repeatedly until the
message display shows [>>Print Status Page].
(3) Press the ENTER key twice. The message
display indicates [Processing] during printing of
the standard status page, then returns to
[Ready].
To print service status page
(1) Press the MENU key on the operator panel.
(2) Press the
U
or
V
key repeatedly until the
message display shows [Others >].
(3) Press the
Z
key.
(4) Press the
U
or
V
key repeatedly until the
message display shows [>Service >].
(5) Press the
Z
key.
(6) Press the
U
or
V
key repeatedly until the
message display shows [>>Print Status Page].
(7) Press the ENTER key twice. The message
display indicates [Processing] during printing of
the service status page, then returns to [Ready].
Initializing the printer and make test print.
Completion of machine installation.