P R O D U C T G U I D E
Y I E L D S
Long Life Technology
Kyocera’s tradition of incorporating long life
consumables and industry leading yields and
preventive maintenance is truly a great benefit
to the consumer. The simple premise to provide
the most reliable MFPs on the market is infor-
mation that can make the difference in a com-
petitive situation when marketing these new
Workgroup Multifunctionals.
Drum
The CS-5050, CS-4050 and CS-3050 all utilize
an Amorphous Silicon (ASi) Drum for imaging.
This ASI Drum is manufactured by Kyocera,
and is one of the most durable surfaces known
to the world. By including an ASI Drum,
Kyocera can manufacture a product with
astounding drum yields. The rated yields are in
the table below:
Based on current competitive models, the drum
yields of the CS-5050, CS-4050 and CS-3050
offer a significant advantage to the customer.
Monocomponent Toner
All three of these products are
Monocomponent, so no developer needs to be
added between Preventive Maintenance sched-
ules, as is the case with competitive dual-com-
ponent MFPs. Monocomponent Technology is
beneficial to the customer, since the image
printed on the page does not degrade over
time with developer depletion during normal
imaging.
Customers with the new CS-5050, CS-4050
and CS-3050 need only replace toner when
required, simplifying their interaction with these
MFPs. Toner replacement is simple and
straightforward, with the sealed toner container
accessed from the front. The toner container
slides easily in the cavity above the engine,
quickly and without mess.
The Toner Container for the CS-5050,
CS-4050 and CS-3050 is exclusive to these
three models and cannot be interchanged with
a printer toner. The rated yield on this toner is
34,000 impressions based on a 6% fill ratio.
A new feature on the TK-719 Toner Container
is the inclusion of an RFID (Radio Frequency
Identification) chip to ensure that customer’s
use the proper toners for these devices.
Preventive Maintenance
Preventive Maintenance or PM, is the interval
determined for Maintenance Kit replacements,
and is set to identify when these replacements
are necessary to ensure the MFP is working up
to manufacturer specification. During the PM of
the CS-5050, CS-4050 and CS-3050, the main-
tenance kit specific to that machine is replaced
by an Authorized and Certified Service
Technician according to service guidelines.
During a PM on these MFPs, the only item that
is replaced is the maintenance kit which con-
sists of the drum assembly, developer assem-
bly, fixing unit, transfer assembly and miscella-
neous feed rollers. By providing all of the
required parts in one kit, Service Technicians
can perform a PM very quickly, with the whole
PM taking 20-30 minutes. Customers requiring
a PM at the appropriate intervals will be up and
running quickly, maximizing uptime.
4 9
Model
Speed
ASi Rated Yield
CS-5050
50 PPM
500,000
CS-4050
40 PPM
500,000
CS-3050
30 PPM
400,000
Summary of Contents for CS-3035 Copystar
Page 1: ...P R O D U C T G U I D E ...
