Kyocera Contax SL300RT*, Instruction Manual

Page: 82 / 133

4-24
4
Using
C
Camera
Mode,
N
Continuous Shooting Mode and
M
Mo
vie Mode
• Because this setting is retained even when the camera is switched off, you need to restore
the original setting or otherwise modify the setting to suit the scene or subject being shot.
Applicable mode:
C
/
N
/
M
When you are composing a shot, if you press the
T
side of the zoom button until the
maximum zoom is reached and then press the
T
side of the zoom button again, digital
zooming begins ( p.3-3). To disable digital zooming, use the procedure below to set digital
zooming to OFF.
4
Press
U
or
D
on the 4-way button to select
[METERING] and then press
R
.
5
Press
U
or
D
on the 4-way button to select
the desired metering mode and then press
the OK button
E
.
[No icon] EVALUATION:The entire screen is partitioned into
64 zones and the light in each zone is
measured to determine the optimum
exposure for the subject. (default)
CENTER: Light is measured with greater weight
given to the central part of the screen
(an area larger than that used for
spot metering).
SPOT AREA: Light is measured at the center of the
screen.
6
Press the MENU button
K
to clear the menu.
7
The icon for the selected exposure mode
appears on the LCD monitor.
[DIGITAL ZOOM]
Switching the Digital Zoom ON and OFF
1
Switch the camera on and press
O
or
Q
on the mode
button until the “
C
”, “
N
” or “
M
” icon lights on the mode
select LED.
LONG EXP.
ISO
METERING
DIGITAL ZOOM
AUTO
EVALUATION
OFF
ON
FOCUSING SPOT AF
SETTINGS(2/2)
Finecam_E.book Page 24 Thursday, August 28, 2003 6:21 PM