Kyocera Contax SL300RT* Instruction Manual Download Page 2

Page: 2 / 133

FCC COMPLIANCE STATEMENT FOR AMERICAN USERS

KYOCERA DIGITAL STILL CAMERA

Tested To Comply With FCC Standards

FOR HOME OR OFFICE USE

FCC Statement

This device complies with Part 15 of the FCC Rules. Operation is subject to the

following two conditions:

(1) This device may not cause harmful interference, and (2) this device must accept

any interference received, including interference that may cause undesired operation.

NOTE

This equipment has been tested and found to comply with the limits for a Class B

digital device, pursuant to Part 15 of the FCC Rules. These limits are designed to

provide reasonable protection against harmful interference in a residential installation.

This equipment generates, uses and can radiate radio frequency energy and, if not

installed and used in accordance with the instructions, may cause harmful

interference to radio communications. However, there is no guarantee that

interference will not occur in a particular installation. If this equipment does cause

harmful interference to radio or television reception, which can be determined by

turning the equipment off and on, the user is encouraged to try to correct the

interference by one or more of the following measures:
• Change the direction of the radio or TV antenna. Move the equipment or the radio or

TV. For example, if the equipment is to the right of the TV, move it to the left of the

TV. Or, move the equipment farther away from the radio or TV.

• Plug the equipment into a different outlet. Do not plug your radio or TV into the same

circuit as your equipment.

• Ensure that all expansion slots (on the back or side of the equipment) are covered.

Also, ensure that all metal retaining brackets are tightly attached to the equipment.

• If these suggestions do not help, consult your equipment dealer or experienced

radio/TV technician for help.

CAUTION

If you modify the camera in any way, without getting approval from KYOCERA

CORPORATION, your camera may violate FCC regulations. Violation of FCC

regulations may cause the FCC to void your right to use the modified camera.

Shielded cables must be used for this equipment to comply with the relevant FCC

regulation.

For customers in Canada CAUTION

This Class B digital apparatus complies with Canadian ICES-003.

Cet appareil numérique de la classe B est conforme à la norme NMB-003 du Canada.

Finecam_E.book Page 2 Thursday, August 28, 2003 6:21 PM

Summary of Contents for Contax SL300RT*






































































































































Search results

Summary of Contents for Contax SL300RT*

Reviews:

Related manuals for Contax SL300RT*

Brands by name

Popular brands

Kyocera Contax SL300RT*, Instruction Manual

Search results

Summary of Contents for Contax SL300RT*

Reviews:

Related manuals for Contax SL300RT*

Brands by name

Popular brands