3-56
Enhancement device setup procedure > Optional device installation
[CONFIDENTIAL]
44
Remove the rear cover of the paper feeder, and then fix the joint bracket (screw x1:
M4x10).
45
Re-attach both rear covers of the paper feeder. This parts are used in Step 34 and in
Step 35.
46
Put seal blower duct [A].
(a) 13±3 [mm]
(b) 13±3 [mm]
(c) 25±3 [mm]
47
Put cover filter assy [A] as arrow mark side up.
NOTE
• If AK-9130 installation is not completed then skip step 45 to step 47.
• If PF-9110 installation is not completed then skip step 45 to step 47.
(a)
(b)
(c)
[A]
[A]
[A]