5FF
1-3-4
Problem
(4)
A paper jam in the
paper feed section
is indicated during
copying (jam in
large paper deck
horizontal paper
conveying section).
Jam code 16
(5)
A paper jam in the
paper feed section
is indicated during
copying (jam in
large paper deck
horizontal paper
conveying section).
Jam code 17
Causes/check procedures
Paper in the large paper
deck is extremely curled.
Check if the paper side
guides are deformed.
Defective paper path sensor
2.
Check if paper feed clutch 1
malfunctions.
Electrical problem with pa-
per feed clutch 1.
Paper in the large paper
deck is extremely curled.
Check if the paper side
guides are deformed.
Defective paper path sensor
1.
Check if the deck feed
clutch malfunctions.
Electrical problem with the
deck feed clutch.
Corrective measures
Change the paper.
Check visually and replace.
With 5 V DC present at CN6-9 on the deck main PCB, check if
CN6-8 on the deck main PCB remains low when paper path
sensor 2 is turned on and off. If it does, replace paper path
sensor 2.
Run maintenance item U247 and select paper feed clutch 1 on
the operation panel to be turned on and off. Check the status
and remedy if necessary.
Check (see page 1-3-8).
Change the paper.
Check visually and replace.
With 5 V DC present at CN6-6 on the deck main PCB, check if
CN6-5 on the deck main PCB remains low when paper path
sensor 1 is turned on and off. If it does, replace paper path
sensor 1.
Run maintenance item U247 and select the deck feed clutch
on the operation panel to be turned on and off. Check the
status and remedy if necessary.
Check (see page 1-3-9).
Summary of Contents for AD-63
