manualshive.com logo in svg

Kyocera AD-63, Service Manual

Share
Download
Kyocera AD-63 Service Manual Download Page 127

Maintenance

Description

item No.

2FD/2FF/2FG

1-4-36

U100

Checking the operation of main high voltage

Description

Performs main charging.

Purpose

To check main charging.

Start

Press the start key. The screen for selecting an item is displayed.

Display

Description

MC ON

Turning the main charger on

LASER ON/OFF

Turning the main charger on and the laser scanner unit on and off

Method

1. Select the item to be operated.
2. Press the start key. The selected operation starts.
3. To stop operation, press the stop/clear key.

Completion

Press the stop/clear key at the screen for selecting an item when main charger output stops. The screen for
selecting a maintenance item No. is displayed.

U101

Setting high voltages

Description

Changes the developing bias voltage and transfer voltage by changing the developing bias control voltage and
transfer control voltage.

Purpose

To check the developing bias and the transfer voltage or to take measures against drop of image density or
background fog.

Method

Press the start key. The screen for selecting an item is displayed.

Setting

1. Select the item to be set. The selected item is displayed in reverse.
2. Change the setting using the cursor up/down keys.

Display

Description

Setting range

Initial setting

DEV BIAS

Developing bias AC component frequency

-255 to 255

0

at image formation

DEV DUTY

Developing bias AC component duty

-100 to 100

0

at image formation

DEV SBIAS

Developing shift bias potential

-1 to 1

0

at image formation

TC DATA

Transfer control voltage

0 to 255

120

Increasing the DEV BIAS setting makes the image lighter; decreasing it makes the image darker.
Increasing the DEV DUTY setting makes the image lighter; decreasing it makes the image darker.
Increasing the DEV SBIAS setting makes the image darker; decreasing it makes the image lighter.
Increasing the TC DATA setting makes the transfer voltage higher, and decreasing it makes the voltage
lower.

3. Press the start key. The value is set.

Interrupt copy mode

While this maintenance item is being performed, copying from an original can be made in interrupt copy mode.

Completion

Press the stop/clear key. The screen for selecting a maintenance item No. is displayed.

Summary of Contents for AD-63


































































































































































































































































































































































































































































































































Reviews:

No comments

Brands by name

Popular brands

Load more brands