Troubleshooting
General error handling
FS-6750
* 96
66
You have inserted a wrong memory card (CompactFlash)
when the
*
message was displayed.
Remove the wrong memory card from the printer’s mem-
ory card slot and insert the correct memory card. The
printer again reads it from the beginning of the data.
.$$
&
PostScript error has occurred and current print process-
ing cannot continue. To print out an error report, display
: .
from the menu selection system,
and select
. Press the
GO
key to resume printing. You
can abandon printing by the
CANCEL
key. If Auto Con-
tinue is set to
, printing will be automatically resumed
after a preset period of time. Refer to printer’s User’s
Manual.
(6
*
The memory card (CompactFlash) is accidentally
removed from the printer’s memory card slot during
reading. If you continue reading the memory card, insert
the same memory card into the slot again. The printer
again reads it from the beginning of the data.
Note: We recommend that you follow the reading proce-
dure from the beginning to ensure correct reading of the
memory card.
(6;3
&
The total amount of data received by the printer exceeds
the printer’s internal memory. Try adding more memory
(expansion DIMM). Press the
GO
key to resume printing.
You can abandon printing by the
CANCEL
key. If Auto
Continue is set to
, printing will be automatically
resumed after a preset period of time. Refer to printer’s
User’s Manual.
(6$$
&
This message appears when an error occurred during
access to the memory card (CompactFlash) using the
PRESCRIBE 2e RWER command or from the printer’s
operator panel. Look at the error code given in place of ##
and refer to the corresponding description given below:
U/
: The memory card (CompactFlash) does not meet the
requirement. This memory card cannot be used by this
printer. Insert a memory card which complies with the
requirements. (See
page 1-5.)
U8
: The memory card is not installed. Check the require-
ments for using the memory card.
U
: The capacity of the memory card is insufficient.
Clean up files.
U
: Specified file not found on the memory card.
U
: Insufficient printer memory to support a memory
card. Expand printer memory.
9
There is no cassette in the feeder, or the cassette is not
inserted properly. When two option feeders are installed
and the lowest one is selected, the same message will
appear if any of the upper feeder cassettes and the
printer cassette is improperly installed. The data trans-
ferred to the printer was too complex to print on a page.
Table 6. 5
Message
Corrective action
Summary of Contents for FS-6750
Page 1: ...SERVICE MANUAL...
Page 6: ...Conventions Preface vi This page left intentionally blank...
Page 120: ...Disassembly Disassembly Option paper feeder 5 24 FS 6750 This page left blank intentionally...
Page 148: ...Troubleshooting Print quality problems 6 28 FS 6750 This page left blank intentionally...
