Unpacking and checking your Kymera
1
Open the front hatch and gently insert baFery tail first into the tray.
2
Slide the baFery back un=l the baFery sits flat in the tray.
3
Rotate the baFery locking bar to its full upright and locked posi=on. (Note the locking pin located
on the side used to release the handle to remove the baFery aber use.)
4
With the power switch off, locate the power plug and insert into the baFery receptacle, making
sure the plug is fully seated.
5
With the bar locked and plug fully installed, switch the baFery power switch to the ON posi=on.
6
You will hear a series of tones during the start up sequence. Do not pull the trigger un=l the tones
have stopped and the computer has finished boo=ng up. We recommend you wait 10 seconds.
If the throFle doesn’t respond aber a few seconds (maybe not enough =me elapsed between
turning the power on and tes=ng the throFle), turn OFF the baFery, wait 10 seconds and retry.
Page
13
Summary of Contents for Body Board
Page 1: ...User s Manual Version 1 8 ...
