manualshive.com logo in svg

KYMCO Xciting 250i, Owner'S Manual, Page: 84 / 92

Share
Download
KYMCO Xciting 250i Owner'S Manual Download Page 84

82

 SPECIFICATIONS - XCITING 500i & 500Ri

Dimensions

Overall length .......................................... 2250 mm (90 in)
Overall width .......................................... 815 mm (32.6 in)
Overall height .......................................... 1450 mm (58 in)
Wheel base ........................................... 1570 mm (62.8 in)

Weight

Dry weight ............................................... 215 kg (473 lbs)

Capacities

Engine oil 

(

after draining) ..................... 2.1 US qt  (2.0 L)

(after draining & oil filter change) ........ 2.1 US qt  (2.0 L)
(after disassembly) .................................. 2.7 US qt (25 L)

Transmission oil

 (

after draining)........ 0.48 USqt (0.45 L)

(after disassembly) ............................... 0.57 US qt (0.5 L)

Fuel tank ........................................... (3.38 US gal, 12.8L )
Maximum weight capacity ..................... 150 kg (330 lbs)

Engine

Bore and stroke ............................................. 92 X 75 mm
Compression ratio ................................................... 10.5:1
Displacement ................................. 498.5 cm

3 

(30.4 cu-in)

Spark plug ................................................................ CR7E
Idle speed ...................................... 1300-1500 min

-1

 (rpm)

Chasis

Tire size, front .................................................... 120/70-15
Tire size, rear ...................................................... 150/70-14

Electrical

Battery................................................................. 12v-12Ah
Headlight................................................. 12v60W/12v55W
Tail/brake light ............ 12v-0.47W LED & (12v4.4W LED)
Turn signal light ............................................. 12v10W X 4
Position light ....... 12v5W (front) & 12v0.47W LED (rear)

Fuses

Main fuse ..................................................................... 30A
Other fuses .......................................................... 10A, 15A

Summary of Contents for Xciting 250i





























































































Reviews:

No comments