KYMCO Xciting 250i, Owner'S Manual, Page: 75 / 92

73
MAINTENANCE
Failure to follow this manual's instructions about tube-
less tires may result in an accident due to tire failure.
Tubeless tires require different service procedures than
tube-type tires.
„ „
„ „ „ Tubeless tires require a tight seal between the tire
bead and wheel rim. Special tire irons and rim pro-
tectors, or a specialized tire mounting machine,
must be used for removing and installing tires to
prevent tire or rim damage which could result in
an air leak.
„ „ „ „ „
Repair puncture in tubeless tires by removing the
tire and applying an internal patch. Repairs of this
type should only be done by a qualified tire ser-
vice professional.
„ „ „ „ „ Never use an external repair plug to repair a punc-
ture since the plug may work loose as a result of
the cornering forces experienced in a scooter tire.
„ „
„ „
„
After repairing a tire, do not exceed 50 MPH (80
km/h) for the first 24 hours, and then never exceed
80 MPH (130 km/h) thereafter. This is to avoid ex-
cessive heat build-up which could cause the re-
pair to fail; resulting in tire deflation.
„ „ „ „ „
Replace the tire if it is punctured in the sidewall
area, or if a puncture in the tread area is larger than
3/16 in (6 mm). Punctures of this size cannot be
repaired adequately.
Cleaning
Clean your scooter regularly to protect the surface finishes
and inspect for damage, wear , and oil, coolant or brake fluid
leakage.
Avoid cleaning products that are not specifically designed for
scooter, motorcycle, or automobile surfaces. Non-specific
cleaners may contain harsh detergents or chemical solvents
that could damage the metal, paint, and plastic on your scooter.
NOTE: If your scooter is still warm from recent operation,
give the engine and exhaust system time to cool off be-
fore washing. Avoid the use of high pressure water spray
(typical in coin-operated car washes) as the powerful spray
can damage components on your scooter.