KYMCO Venox 250, Service Manual

Page: 15 / 243

1
. GENERAL INFORMATION
1-9
VENOX250/250i
„
After routing, check that the wire harnesses
are not twisted or kinked.
„
Wire harnesses routed along with
handlebar should not be pulled tight, have
excessive slack or interfere with adjacent
or surrounding parts in all steering
positions.
„
When a testing device is used, make sure to
understand the operating methods
thoroughly and operate according to the
operating instructions.
„
Be careful not to drop any parts.
„
When rust is found on a terminal, remove
the rust with sand paper or equivalent
before connecting.
„
Do not bend or twist control cables.
Damaged control cables will not operate
smoothly and may stick or bind.
Do you understand
the instrument? Is
the instrument set
correctly?
Remove
rust !