KYMCO Scout 50, Service Manual, Page: 7 / 188

2
. GENERAL INFORMATION
2-3
ZX / SCOUT
to the specified capacity.
n
After operation, terminal caps shall be installed
securely.
n
When taking out the connector, the lock on
the connector shall be released before
operation.
n
Hold the connector body when connecting or
disconnecting it.
n
Do not pull the connector wire.
n
Check if any connector terminal is bending,
protruding or loose.
n
The connector shall be inserted completely.
n
If the double connector has a lock, lock it
at the correct position.
n
Check if there is any loose wire.
n
Before connecting a terminal, check for
damaged terminal cover or loose negative
terminal.
n
Check the double connector cover for proper
coverage and installation.
n
Insert the terminal completely.
n
Check the terminal cover for proper coverage.
n
Do not make the terminal cover opening face
up.
n
Secure wire harnesses to the frame with their
respective wire bands at the designated
locations.
Tighten the bands so that only the insulated
surfaces contact the wire harnesses.
n
After clamping, check each wire to make sure
it is secure.
Easy confirm