48
MAINTENANCE
Transmission fluid type:
SAE 90
Transmission fluid capacity:
0.20 qt (0.18 L)
NOTE: The fill amount specified is the amount to use after
completely draining the used transmission fluid.
Using the wrong transmission fluid type or viscosity
may cause premature transmission component wear.
Do not exceed the specified amount when adding trans-
mission fluid. If too much fluid is added to the trans-
mission case, it could be forced into the air cleaner as-
sembly during operation, causing air filter contamina-
tion and poor engine performance.
Fuel system inspection & Idle Speed
Check the fuel hoses and fittings for any signs of leakage.
1. Check for leakage at the carburetor.
2. Check for leakage from the fuel hoses, clamps and joints.
3. Check for leakage at the fuel filter.
4. Check for leakage at the fuel tank.
Engine idle speed:
1700 RPM
1. Adjust the engine idle speed using the adjustment screw
on the carburetor throttle cable linkage
1
.
Replace any fuel system components that are leaking fuel.
Contact your KYMCO dealer for fuel system service, re-
pairs or engine idle speed adjustment.
1
1
1
1
1