KYMCO Mongoose 250, Owner'S Manual

Page: 29 / 160

Stater button
To starter the engine, press the starter button,
with the transmission in neutral, the ignition
switch ON (
) and the engine stop switch at
RUN ( )
Headlight switch
Turning the switch to the " " position to switch
off the headlight and the taillight.
．
Turning the switch to the " " position to switch
on the low beam and the taillight.
Turning the switch to the " " position to switch
on the high beam and the taillight.
20
(1)
(2)
(1) Headlight switch (2) Starter button
See starting instructions prior to starting
engine (see page 44 for details).
CAUTION:
If the starter switch is pushed with the ignition
switch "
" and the engine stop switch " ", the
starter motor will be activated but the engine
will not start. To start the engine, be sure to
position the engine stop switch at "
".
．
NOTE:
Handlebar switches