KYMCO Mongoose 250 Owner'S Manual Download Page 69

Page: 69 / 160

Apparel

POTENTIAL HAZARD

Operating this ATV without wearing an

approved motorcycle helmet, eye

protection and protective clothing.

WHAT CAN HAPPEN

Operating without an

approved motorcycle

helmet increases your

chances of a severe

head injury or death in

the event of an

accident.

Operating without eye

protection can result in

an accident and

increases your chances

of a severe injury in the

event of an accident.

Operating without protective clothing

increases your chances of severe injury in

the event of an accident.

HOW TO AVOID THE HAZARD

Always wear an approved motorcycle

helmet that fits properly.

You should also wear:

eye protection(goggles or face shield)

gloves

boots

long-sleeved shirt or jacket

Long pants

WARNING

Summary of Contents for Mongoose 250

































































































































































Search results

Summary of Contents for Mongoose 250

Reviews:

Related manuals for Mongoose 250

Brands by name

Popular brands

KYMCO Mongoose 250, Owner'S Manual

Search results

Summary of Contents for Mongoose 250

Reviews:

Related manuals for Mongoose 250

Brands by name

Popular brands