KYMCO LIKE 150i Owner'S Manual Download Page 57 | Manualshive

Page: 57 / 61

KYMCO LIKE 150i Owner'S Manual Download Page 57

EMISSION CONTROL

Crankcase Emission Control System

The

motorcycle is equipped with a closed crankcase system. Blow-by gas is recycled into the

combustion chamber via the intake system. This arrangement is to prevent blow-by gas from
spreading to the atmosphere.

Exhaust Emission Control System

The exhaust emission from the motorcycle is controlled by combustion management, fuel delivery,
ignition setting and exhaust system. The exhaust system also includes the catalytic converter in the
muffler.

Evaporative Emission Control System

The evaporative emission control system is used to prevent gasoline vapors from escaping into
the atmosphere from the fuel tank and fuel system.

Noise Exhaust Emission Control System

The engine, intake and exhaust systems of the motorcycle are designed to comply with federal or
local noise regulations. Do not modify the intake or exhaust system; this behavior will offend against
the noise regulations.

WARNING

Do not adapt any original factory design and setting, which
will deteriorate the sound or emission level.

53

«
...
55
56
57
58
59
...
»

Summary of Contents for LIKE 150i






























































Reviews:

No comments