CONTROLS & FEATURES
1 5
ABS indicator light (For ABS model)
The ABS indicator light is located on the right
side of the multifunction meter. This ABS
system will diagnose itself, if it
’s normal, the
indicator light will come on when the ignition
switch is turned on and goes off shortly after the
vehicle starts moving. The ABS indicator light
will stay off as long as the ABS system works
normally.
If an ABS fault is detected by the ABS ECU, the
ABS indicator will light on and stay on until the
fault is resolved. Even there
’s an ABS system
failure, the system will work normally in
conventional braking condition just like a vehicle
without ABS system.
▆
NOTE:
If the ABS indicates a fault, it
’s very important
to make the authorized KYMCO dealer to check the ABS
system immediately.