CONTROLS & FEATURES
①
Odometer/Trip meter:
˙
Press MODE button to toggle between ODO
mode, trip mode, oil trip and belt trip.
˙
Choose trip mode, hold both MODE and
ADJ for 2 seconds to reset trip mileage .
˙
Press ADJ to switch between km display
and miles display.
②
Fuel Level Meter: It displays how much
fuel left in the fuel tank. When the fuel tank
is near empty, it alerts the rider to refill the
fuel tank as soon as possible.
③
Speedometer: Indicates the road speed in
km/h or mph
④
Turn Signal Indicator Light: Flashes when
either turn signal is being used.
⑤
High Beam Indicator Light: This light is
illuminated when the high beam is on.
⑥
Service indicator: It lights up every 2000km
to remind you to do oil service. It lights up
every 20000km to remind you to change the
drive belt. Whenever the ignition switch is
turned on, it goes on then off after self-
diagnose.
⑦
Battery voltage display
⑧
Digital Clock
⑨
CELP indicator: If it keeps on after start the
engine, it indicates that a fault has been
detected in the EFI or electrical system.
Need to have immediate inspection by the
authorized KYMCO dealer.
▆
NOTE:
CELP lights on when you turn on the ignition
switch, it goes off after start the engine.
1 1