13
. REAR WHEEL/REAR BRAKE/
REAR
SUSPENSION
13-4
AGILITY 125
Apply a small amount of engine oil to the felt
seal and install it to the brake cam.
Install the wear indicator plate and brake arm.
Install and tighten the brake arm bolt.
Install the brake arm return spring.
Install the brake arm pin.
Connect the brake cable and install the
adjusting nut.
Install the rear wheel. (
Ö
13-2)
Adjust the rear brake lever free play.
(
Ö
3-8)
REAR SHOCK ABSORBER
REMOVAL
Remove the frame body cover. (
Ö
2-3)
Remove the air cleaner case. (
Ö
5-19)
Remove the rear shock absorber upper and
lower mount bolts.
Remove the rear shock absorber.
DISASSEMBLY
Install the rear shock absorber compressor as
the figure shown.
Compress the rear shock absorber spring.
Cushion Assemble & Disassemble Tool
Align the wide groove on the wear
indicator plate with the wide tooth of the
brake cam.
＊
Align the scribed line on the brake arm
with the punch mark on the brake cam.
＊
Adjusting Nut
Brake Arm Pin
Brake Cable
Install the rear shock absorber lower
joint into the rear shock absorber
compressor.
＊
Brake Arm
Rear Shock Absorber Compressor
Lower Mount Bolt
Upper Mount Bolt
Rear Shock Absorber
Cushion Assemble & Disassemble Too
Special
Wear Indicator Plate
Brake Cam
Brake Arm Bolt
Brake Arm
Punch Mark
