KYLAND KIEN1005, User Manual

Page: 18 / 32

──────────────────────── 16 ────────────────────────
The front panel of KIEN1005-1S （ M ） -4T contains four Ethernet RJ45 ports of
10Base-T/100Base-TX, one pair of fiber ports, one power terminal, one
indicating light for power supply, and one indicating light for fiber port running
status. It is structured as figure:
LINK/ACT
10/100M
1
2
3
4
RX
TX
POW ACT
Figure: 3-5 KIEN1005-1S （ M ） -4T front panel
Optical fiber interface
KIEN1005-1S （ M ） -4T offers one full-duplex fiber port of 100Base-FX,
single mode or multimode, which is numbered as five. Its connector can be
SC or FC. The optical fiber interface should be used in pair (TX and RX in
pair), where, the TX interface is the optical transmitting terminal which
connects to the optical receiving terminal RX for the optical interface of the
remote switching, the RX is the optical receiving terminal which connects
to the optical transmitting terminal TX for the same optical interface of the
remote switch..
Ethernet RJ45 Port
KIEN1005-5T offers five Ethernet RJ45 ports of 10Base-T/100Base-TX.
KIEN1005-1S （ M ） -4T contains four Ethernet RJ45 ports of
10Base-T/100Base-TX. Each RJ45 port is adaptive and supports auto