SICOM3010G User’s Manual-v1.0
28
Management View
SWITCH#show version
Show version of switch
Management View
SWITCH#reboot
Reboot
Management View
SWITCH#load default
Restore default configuration (except
for IP address)
Management View
SWITCH#config terminal
Enter configuration view
8.2 Connected through Ethernet Cable
1. Connect any RJ45 port of the switch with the Ethernet port of a personal
computer with a RJ45 cable.
2. Open Run window from the start menu, then input “ ‘IP address’”.
The default IP address is
192.168.0.2
.
Figure 30 Enter Telnet
3. Click “OK” to enter the Telnet configuration interface. Type in a CLI
command from Table 9.
8.3 Web Access
1. Connect the Ethernet port on the PC to any RJ45 port on the switch.
2. Input the IP address of the current switch in web browser, the default IP is
