SICOM3010G User’s Manual-v1.0
22
Figure 23 18#AWG Yellow-Green Line (Unit: mm)
Note
: If SICOM3010G needs to perform a dielectric voltage withstand test, in order to
avoid test failure, please disconnect the 18#AWG yellow-green line to disable surge
protection circuit that leads to leakage electricity.
Figure 24 Disconnect 18#AWG Yellow-Green Line (Unit: mm)
5.7 Relay Contact
The relay contact is used for alarm output. When the switch works normally,
the normally-open contact of the alarm relay is closed and the
normally-closed contact is open; when the alarm occurs, the normally-open
contact is open and the normally-closed contact is closed. The alarm is
outputted through a 3-pin 5.08mm spacing terminal block as shown in
