8
z
Dimension Drawing for Panel Mounting (Unit: mm)
Figure 5 Panel Mounting
4.2 Mounting Steps
z
KIEN1008G DIN-Rail Mounting
The specific steps are as follows:
Step 1: Select the mounting position for KIEN1008G and ensure that there is
adequate space.
Step 2: Insert the top of the DIN-Rail into the spring-supported slot of the
DIN-Rail connecting seat in the rear panel of KIEN1008G as seen below;
move the device in the direction of arrow 2 to put the whole Din-Rail into place;
verify the KIEN1008G is firmly mounted on the DIN-Rail, as shown below.
Figure 6 DIN-Rail Mounting
