14
¾
Wiring
While wiring, first insert the SFP modular into the SFP slot in the device, and
then plug the optical fiber into the SFP module. See Figure 14
Figure 14 SFP Gigabit Optical Fiber Transceiver Wiring
5.3 Power
According to the power input requirements, use a 5.08mm-spacing terminal block
to connect the power cable.
Note
: The cross section area of the power cable is required to be greater than 0.75mm
2
and less
than 2.5mm
2
. The grounding resistance requirement: <5
Ω
.
z
5.08mm power terminal block pin number is shown in Figure 15
Figure 15 Pin 5.08mm Power Terminal Block
z
5.08mm power terminal block contact definition
