29
are as shown in the following figure.
5.2 Transparent-B
Using a KGW3101 Modbus Gateway and a PC in Transparent-B mode, the port type is RS-232. The ethernet
side works as a Modbus TCP Master. Connect S1 which works as a Modbus RTU/ASCII Slave to PC by DB9
female cable.
A. Web Configuration
Power on KGW3101 and log in web server of the device, set the operation mode of device to Transparent
Mode in
“Overview” page.
Then, click
“Operating Settings” in navigation bar to set S1 to RTU Slave mode, click “Save” to save the
change.
Click
“Serial Settings” in navigation bar to set the parameters of the serial port, and click “Save” to save the
change.
