©2015 Spectrum Brands, Inc.
1. Keep door open. Press and HOLD the Program button until the keypad
fl ashes green (about 5 seconds).
2. Press Lock button once.
3. Enter Mastercode.
4. Press Lock button once.
5. Re-enter Mastercode.
6. Press Lock button once.
If programming is successful, the keypad will flash green once with
one beep.
If programming is unsuccessful, the keypad will fl ash red three times with
three beeps. Make sure the Mastercode has been enabled before trying
to disable it. Attempt this procedure again, making sure to enter the same
Mastercode in steps 3 and 5.
7. Make sure switch #3 is on, and then press the Program button once.
If you don’t immediately hear three beeps and see the keypad fl ash
green, the Mastercode is disabled.
Note: The lock will time out after fi ve seconds.
61920 / 01
7 / 15
Technical Support
1-800-327-5625
www.kwikset.com
F
Disabling and Deleting the Mastercode
