4
Install the exterior assembly and mounting plate
5
Install interior assembly
2 / 4
2-1/8"
54 mm
1-1/2"
38 mm
What is the diameter of the hole in the door?
Install cylinder in exterior assembly.
A
B
actual
size
Make sure shaft is oriented as shown. If
needed, rotate the shaft to this position.
Stripe should
be vertical.
c
Tighten screws evenly.
thicker screws
Insert key and test latch.
If latch does not extend
or retract smoothly,
adjust screws (A2).
Remove key when
finished and make
sure the latch bolt
is fully extended.
Install exterior assembly and mounting plate. Use the parts in Kit “A.”
C
Keep parallel to
edge of door.
a
b
c
C
D
Align the turnpiece shaft with the torque blade.
Secure with two (2) interior assembly screws from Kit “A.”
Remove the interior cover and battery pack.
A
a
b
d
Make sure the turnpiece is
in the vertical position.
Remove the
interior cover.
Remove the battery pack.
Do not install
batteries yet.
Gold adapter:
Keep slot vertical.
Install the adapter on the interior assembly.
back view
of interior
assembly
B
Silver adapter:
Tab is on bottom.
Black adapter:
Curve is on top.
bottom
hole
Press the X1 (Black) adapter firmly
onto the interior assembly
align tabs
Install “T”
on exterior
assembly.
Do not
install “T”.
Diameter is 2-1/8"
(54 mm)
Diameter is 1-1/2"
(38 mm)
or
G
D
F
F
H
T
T
U
V
A1
M
A2
(x2)
A2
(x2)
W
F
D
(x2)
X3
X2
X1
F
vertical
H
