3579 SERIES MORTICE LOCK
MOUNTING INSTRUCTIONS
P/No. 3579-5121 0617
RIGHT - HAND DOOR
LEFT - HAND DOOR
OUTSIDE
DOOR OPENING
IN
OUTSIDE
DOOR OPENING
OUT
OUTSIDE
DOOR OPENING
OUT
OUTSIDE
DOOR OPENING
IN
1
4
2
SETTING LOCK STATUS
SETTING LOCK STATUS
HAND OF DOOR ACCORDING TO ENGLISH PRACTICE
Determine hand of lock required from hand of door chart above.
All Lockwood 3579 Series Mortice Locks are mounted in accordance
with these instructions. Locks may or may not have cylinders,
lever handles, turn knob or emergency button. Disregard instructions
referring to the features not required.
Important : Before drilling door, ensure correct hand is being installed.
NOTE: CASE DOES NOT need to be opened, to change HAND or
FUNCTION of LOCK.
HANDING OF LOCK
Determine hand of lock required from above hand of door chart.
Rotate bolt head to suit latching direction.
Ensure lock is in UNLOCKED position.
To UNLOCK (if required), using a small screwdriver, lever out Cylinder Hole
Plug where fitted and lift snib using the screwdriver.
SNIB CAM
Rotation of the Snib Cam hands the lock. Use a small screwdriver to rotate
cam if required.
Combination locks
(Both handles can be locked) DOT in the up position.
Vestibule Locks
With single action escape feature. DOT to be DOWN on ESCAPE
side and UP on LOCKABLE side.
Establish which side the adaptor is to be located, lever out Cylinder hole plug
where fitted.
PUT LOCK IN LOCKED POSITION
, as shown in Step 1.
Insert Adaptor into lock body with TOP of Turn Knob Cam point away from front
of lock body.
Ensure Turn Knob Cam is engaged in yoke of snib as shown.
Place retainer pin through front plate to retain adaptor to lock. Ensure pin is
flush with front plate
To de-activate KICK-OFF function, ensure the lock is unlocked, then
remove the KICK-OFF screw as shown. Rotate screw in the direction of
the arrow as the screw is left hand thread.
LOCKABLE
LOCKABLE
VESTIBULE
RIGHT HAND
DOOR
LOCKABLE
ESCAPE
VESTIBULE
LEFT HAND
DOOR
ESCAPE
LOCKABLE
3
SETTING KICK-OFF FUNCTION
YOKE
TURN KNOB CAM
TEAR HERE
COMBINATION
TURN KNOB ADAPTORS
UNLOCKED
LOCKED
TEAR HERE
ENSURE LOCK IS REMOVED FROM MORTICE
BEFORE DRILLING HOLES
DO NOT DRILL HOLES RIGHT THROUGH DOOR
TO PREVENT POSSIBLE DAMAGE TO DOOR FACE
ENSURE LOCK IS REMO
VED FROM MORTICE
BEFORE DRILLING HOLES
DO NOT DRILL HOLES RIGHT THROUGH DOOR
TO PREVENT POSSIBLE D
AMAGE T
O DOOR FACE
EDGE A
60mm B
ACKSET
89mm B
ACKSET
127mm B
ACKSET
1 HOLE - 22mm DIA.
FOR
SPINDLE
FOLD LINE ALONG EDGE OF DOOR 60mm BACKSET
FOLD LINE ALONG EDGE OF DOOR 60mm B
ACKSET
1 HOLE - 22mm DIA.
FOR
TURN KNOB
2 HOLES - 20mm DIA.
FOR
CYLINDER
7 HOLES
ø
22mm x
90mm DEEP
(for 60mm backset)
MORTICE
CENTRELINE
1 HOLE - 22mm DIA.
FOR
SPINDLE
1 HOLE - 22mm DIA.
FOR
TURN KNOB
2 HOLES - 20mm DIA.
FOR
CYLINDER
60mm B
ACKSET
89mm B
ACKSET
127mm B
ACKSET
