background image

5. Programming Instructions

6. Proper Operation of Touchpad Electronic Deadbolt

7

To Enter Second Code

 

Push program button twice, then repeat steps 

2-4.

5

Push the Lock button on outside touch pad to 

extend latch bolt 1” which locks the door when 

you leave.
Enter your desired personal code to retract 

the latch bolt completely which unlocks the 

door when you return home.
The T-turn on the inside of the door is used to 

extend (lock) or retract (unlock) the latch bolt 

when you are inside.
Using the key from the outside will also extend 

(lock) or retract (unlock) the latch bolt.
This Touchpad Electronic Deadbolt should be 

accompanied by a Kwikset Knobset, Leverset, 

or Handleset.

 

 

 

5

Enter your number to verify that it retracts 

the latch B.

4

Snap access cover 

onto power board

 H

Align cover to top of power board and press 

down at the bottom of the cover (see illustra-

tion below). To coordinate with your home 

decorating scheme, the access cover may 

be painted to 

match your 

door.  

CAUTION:

   

Prevent unauthorized 

entry.  This lock can be opened 

using two different codes that are randomly 

set at the factory.  Upon installation and 

set-up, replace both of these codes with 

your own.  Since anyone with access to the 

power board can change these codes, you 

must restrict access to the power board 

and routinely check both codes to assure 

they have not been altered without your 

knowledge.

Summary of Contents for 907 15 SMT
























Reviews: