10. Tie backstay rope as shown below. Net must be installed correctly if goal is to look and perform as designed.
11. When removing goal from field location, be sure to disassemble and store in a safe place to prevent injury.
(See Guidelines for Moveable Soccer Goal Safety, included). Insert red ground anchor caps into exposed
ground anchor hole to prevent damage to threads.
Step 1
Tie rope to one eyebolt.
Step 2
Run rope under net and thread loose end of rope through
eyebolt. Tie loop in rope approx. 48” from eyebolt.
Step 3
Thread loose end of rope through loop and pull
net rope taut.
Step 4
Tie loose end to eyebolt and weave
extra loose rope through net.
48”
Approx.
Pull
48”
Approx.
NZ181 Rev. 07/17/17
***CAUTION***
This goal has been designed to be used for the game of soccer only. Goal posts must be anchored AT ALL TIMES
and shall be secured against overturning. Do not climb on the net or goal framework at any time! All fastenings
must be checked to insure they are fully tightened before and after each use of this product. Goal posts not in use
must be disassembled and properly stored in a safe, secure area (See included Guidelines for Movable Soccer Goal
Safety.). Assembled goal posts should not be left unattended. Remove nets when goals are not in use. Do not use
this equipment during the threat of high winds. Goal posts should be checked for safety before and after each use.
All warning and safety labels included with this product must be visible at all times.
Any modifications to this or any Kwik Goal product will void any and all warranties.
Go to kwikgoal.com for additional product information.
