Left Arm Assembly
Right Arm Assembly
Crossbar
3/8” X 1 1/4” Hex Bolt
3/8” Lock Washer
3/8” Flat Washer
Channel Spacer
Backdrop
1/4” Lock Nut
1/4” Flat Washer
1/4” X 2” Eye Bolt
3. Lay out right arm assembly and left arm assembly face down on ground, and attach eye bolt to backstays.
4. Insert channel spacers into channel on each end of top rail. Connect rail with 3/8" hex bolts.
NOTE: Special stainless steel hardware is used on rail connections. Be sure to use hardware packaged
seperately and labeled as JZ71.
CAUTION: DO NOT OVER-TIGHTEN BOLTS.
NZ181 Rev. 07/17/17
***CAUTION***
This goal has been designed to be used for the game of soccer only. Goal posts must be anchored AT ALL TIMES
and shall be secured against overturning. Do not climb on the net or goal framework at any time! All fastenings
must be checked to insure they are fully tightened before and after each use of this product. Goal posts not in use
must be disassembled and properly stored in a safe, secure area (See included Guidelines for Movable Soccer Goal
Safety.). Assembled goal posts should not be left unattended. Remove nets when goals are not in use. Do not use
this equipment during the threat of high winds. Goal posts should be checked for safety before and after each use.
All warning and safety labels included with this product must be visible at all times.
Any modifications to this or any Kwik Goal product will void any and all warranties.
