Hardware
Hardware may be packaged separately
Note:
in one or more boxes. Open all packages
before beginning assembly.
1/4” x 1/2” Set Screw
(Part# TZ252)
(2)
Tension Strap
(Part#10B5801)
(3)
3/8“ x 1-1/4” Hex Bolt
(Part# TZ59)
(12)
Snap Link
(VZ189)
(1)
3/8" x 7/8" Hex Bolt
(Part# TZ249)
(6)
Tension Mechanism
(VZ232)
(1)
3/8“ Lock Washer
(Part# TZ65)
(16)
Nylon Strap
(* See Below)
(1)
3/8“ Flat Washer
(Part# TZ60)
(16)
5/16” Lock Nut
(TZ5)
(1)
3/8" Square Nut
(Part# TZ247)
(4)
5/16” Flat Washer
(TZ4)
(2)
5/16” x 3-1/4” Hex Bolts
(Part# TZ206)
(2)
5/16” x 3-1/4” Hex Bolt
(TZ206)
(1)
5/16" Flat Washer
(Part# TZ4)
(4)
3/8” x 3-1/4” Eye Bolt
(TZ198)
(1)
5/16” Lock Nut
(Part# TZ5)
(2)
3/8” Lock Nut
(TZ197)
(1)
3/8” Flat Washer
(TZ189)
(1)
*Replacement nylon straps available in set of 3 straps
(Part#VZ607)
Assembly Tools
Mallet
Scissors
Allen wrench
1/8”
Ratchet with
1/2”& 9/16”
Sockets
1/2”& 9/16”
Wrenches
9/
16
NZ225 Rev. 03/04/19
***CAUTION***
This goal has been designed to be used for the game of soccer only. Goal posts must be anchored AT ALL TIMES
and shall be secured against overturning. Do not climb on the net or goal framework at any time! All fastenings
must be checked to insure they are fully tightened before and after each use of this product. Goal posts not in use
must be disassembled and properly stored in a safe, secure area (See included Guidelines for Movable Soccer Goal
Safety.). Assembled goal posts should not be left unattended. Remove nets when goals are not in use. Do not use
this equipment during the threat of high winds. Goal posts should be checked for safety before and after each use.
All warning and safety labels included with this product must be visible at all times.
Any modifications to this or any Kwik Goal product will void any and all warranties.
