3. Attach left post and right post to crossbar as shown. Note
direction of decals on crossbar before fastening. Be sure
connections are pressed firmly together before tightening hex
bolts.
T Spacer
1/4” X 1/2”
Set Screw
3/8" Square Nuts
3/8"
Square Nuts
T Spacer
Left Post
Crossbar
Right Post
Left Post
Post Ground Sleeve
Post Ground Sleeve
4. Insert two 3/8” square nuts and one T-spacer into left post and
right post. Lock T-spacer into position with 1/4” x 1/2” set screws.
Slide front post ground sleeves onto left post and right post.
Left Post
Crossbar
Right Post
Channel
Spacer
Crossbar
3/8” X 1-1/4” Hex Bolt
3/8” Lock Washer
3/8” Flat Washer
Right Post
NZ225 Rev. 03/04/19
***CAUTION***
This goal has been designed to be used for the game of soccer only. Goal posts must be anchored AT ALL TIMES
and shall be secured against overturning. Do not climb on the net or goal framework at any time! All fastenings
must be checked to insure they are fully tightened before and after each use of this product. Goal posts not in use
must be disassembled and properly stored in a safe, secure area (See included Guidelines for Movable Soccer Goal
Safety.). Assembled goal posts should not be left unattended. Remove nets when goals are not in use. Do not use
this equipment during the threat of high winds. Goal posts should be checked for safety before and after each use.
All warning and safety labels included with this product must be visible at all times.
Any modifications to this or any Kwik Goal product will void any and all warranties.
